The Gear Events are a type of obstacle in Piggy appearing in House - Chapter 1, School - Chapter 5, Plant's Bittersweet Quest, and Sewers - Chapter 5.
Appearance[]
House - Chapter 1[]
The Gear Event in House appears as a gray box with metal pipes in the panel. Interestingly, a set of blue gears have already been placed within the box. This variant of the Gear Event is also the only one out of the three to have a pre-existing gear in place.
School - Chapter 5 and Plant - Chapter 12[]
School and Plant's Gear Event appears as a twin-piped structure, held in place by four metal disks. The pipes support a gray, rectangular frame, that has four areas where the gears would go. Unlike House, this Gear Event lacks the Blue Gears.
Sewers - Chapter 5[]
The Sewers Control Panel is the Gear Event that has a white gear and a bolt in it. When activated, all the buttons will glow, and the water levels will quickly drain. When it is not activated, there will be a white gear slot, a bolt, and every button will not glow.
Requirements[]
Place the gears in the gear puzzle by touching or clicking it.
In Sewers, in order to be able to use the White Gears, you must first take out the glass panel with the screwdriver.
Locations[]
House - Chapter 1[]
In the shed outside of the house.
School - Chapter 5[]
Next to the entrance that leads to the sewers below the School.
Plant - Chapter 12[]
In the School memory on the right wall.
Sewers - Chapter 5[]
Two of this event appear on opposite sides of the map within the corridor above the lower levels, with only one needing to be completed.
Trivia[]
- This is one of the few obstacles that have a variant of different colors, shape, etc.
Gallery[]
